How To Attach Wire Leader To Fishing Line? Expert Guide

How To Attach Wire Leader To Fishing Line

If you are fishing for a long time and you are pro at it. You must know the use of fishing leaders. The fishing wire leader is used due to its more strength. The sharp teeth of fish can cut the fluorocarbon or monofilament leaders. So the wire leaders are best for this purpose. The wire leader is strong and thin as compared to others. But you don’t have to maintain the wire leader. You must change for other fishing. We will discuss the types of leaders and also how to attach wire leader to fishing line. Hope you will get the answers to your thoughts.

What is a Fishing Leader?

A leader is a short, extra-strong piece of the fishing line. It is present between the end of the fishing line, lure, and hook. This wire is less visible and more resistant to breaking due to its material. The common length of wire is 12” to 20 feet. It increases our chances of success in catching fish. The fishing leader offers a thin line that is easier to reel in and the thin line help to cast further. Before using fishing leader you must know how to attach wire leader to fishing line.

Wire Leaders For Fishing

Wire leaders are available in a variety of materials and are selected on your catch. The requirement of the leader depends on the weight of your catch. Heavier and strong fish need tougher leaders. Generally, wire leader is made up of steel but there are also more made up of titanium or nickel-titanium. Other than steel leaders, offers more strength with thinner wires.

There are three main kinds of wire leaders depending on knots, which are single-strand, multi-strand, and knot-able.

Knot-able is mostly easily tied with any regular knots you normally used. We can use the same with wire leaders, but you can also buy premade ones with a clip on one end and barrel swivel on the other.

Type of Leaders For the Fishing Line

Following are leaders for the fishing line:

Titanium Wire Leader

Titanium wire leader is the most costly wire we find in the market. Titanium is regarded as fluorocarbon of metallic leaders. The tiny diameter minimizes the visibility of the wire. This wire is more bend-proof and cut-proof than other metals. Titanium wire leader is single-strand nickel titanium that has some stretch and has advantages with lighter strands. This wire is quick to get up clinch and Albright knots.

Seven-Strand Fishing Leader

A seven-strand fishing leader is famous due to its flexibility and immunity to bending. It is made up of seven strands of twisted stainless steel. It also has a round profile, making it conducive to rumpling. It is one of the strongest fishing leaders.

Nylon-Coated Seven-Strand Fishing Leader

Nylon-coated seven-strand fishing leaders reduce the shine or glare in the water due to the nylon finish of the material. This fishing leader is flexible and supple and allows easy fabricating. Its trapping in salt coating makes it weak. It may also slip through sleeves.

Single-Strand Fishing Wire

Single-strand fishing wire offers a lot of cleverness. The wire has darker brown or almost purplish color. This color makes it darker and it is beneficial for fishing. It is drop-down in size and varies leader material.

However, you must know how to attach wire leader to the fishing line which is explained next.

How To Attach Wire Leader To Fishing Line?

With the help of the following steps, you will learn about how to attach wire leader to fishing line.

Step 1: The first step is to connect the leader with the mainline. For this, create a loop and pass the working end of the leader line through this loop and this way tie a knot with the leader line but the loop should be wide to make easy passing of mainline ending through the knot. To avoid the breakage of mainline a leader line of at least 23 kg will be required.

Step 2: Now bring almost 20 cm of mainline through the knot which connects the leader line and the mainline and forms a loop. After making a loop near the overhand knot, keep it hooded with your fingers and wrap the loose end of the mainline around the leader, then pass the mainline through the loop.

Step 3: To secure the knot pull the mainline behind the knot but try to do this slowly to fit it neat and in position, then pull the mainline behind the overhand knot to tighten it up, also pull the loose end of the mainline to make sure the coils are tight. Moreover, making it wet with saliva or water will tighten it as much as possible because this minimizes the chances of slippage.

Step 4: Now, it’s time to attach the leader with a lure or hook. For this, you have to tie a loop knot. We have to make this knot with our leader line and have to leave the 4 Inches of leader line on the side that will go into the lure. Tie up the leader line onto the lure then bring the line through the original loop.

Step 5: Now you have to pull the leader line till the moment that it touches the top of the lure. After this, take the shorter end of the leader line and wrap it around the long end of the line at least 5 times and take the left short end of the line through the loop above the lure. To secure it pull it tight.

Final Step: In case that the leader and mainline have the same tendency of breaking you can use a snug knot as well. Tie up the thread line with thread through the eye of the hook and take the leader line behind itself to form a loop. Now pass the short end of the leader line through the loop and hold it to create the second loop making a shape of eight and pulling it tight till the loops disappear and the knot is secured.

After the final step, you have learned how to attach wire leader to fishing line.

Video Credit: Thundermist Lures

Frequently Asked Questions (FAQs)

What’s the best type of knot to use?

Knot partly depends on your line. For monofilament to monofilament or monofilament to fluorocarbon, try to use triple surgeon’s knot. For the premium quality line like braid to monofilament or braid to fluorocarbon, must use the RP knot.

Should you use a leader with a lure?

Yes, you can use it. As the leader doesn’t absorb water or sunlight, this increases life and it will not break down as quickly as the monofilament line.

How long should my leader line be?

Your leader line should be between 24 to 30 inches. This length depends on your fishing style, main fishing line, weather, and surrounding underwater features.

Can I use regular mono for the leader?

Yes, you can use regular mono for leaders but not as a shock leader. There is no need to buy leader material regular mono works fine or regular fluorocarbon works as a leader.



Leave a Comment